Teledyne Vacuum Gauge 2002 Manuel d'utilisateur télécharger pdf (Page 5)

Model 2002 page 5

General Information

SECTION 1

The Model 2002 is a wide range vacuum measuring instrument consisting of a digital microproces-

sor-based display unit, a miniature, rugged, thin film based sensing element that measures from

below 1x10

-4

up to 100 Torr, a piezoresistive sensor that measures from 1 to 1000 Torr,

EEPROM (Electrically Erasable/Programmable Read Only Memory), and an interconnecting

cable. Together, these components provide accurate vacuum measurement over 7 decades of

vacuum from 1x10

-4

to 1000 Torr. This instrument is a new design approach based on over 50

years of experience by Hastings Instruments with well-known and widely used thermal conduc-

tion vacuum measurement techniques. The Model 2002 is designed for quick, easy installation

and will provide the user with long lasting, trouble free, accurate vacuum measurement.

1.1 Features

• Wide dynamic range: 1x10

-4

to 1000 Torr

• Compact rugged design

• Attitude insensitive

• Fast dynamic response

• Withstands 150 psig positive pressure

• Linear per decade

• Bakeable to 250

• TTL output process control

• Interchangeable transducer

• Corrosion resistant

1.2 Model 2002 Sensors

The Model 2002 transducer is comprised of an ion implanted, piezoresistive, direct force sensor

and a thin film Pirani type sensor. The Pirani sensing element is a Pt thin film serpentine element

(see Figure 5.3a) deposited on a 1 micron thick Si

membrane. The membrane is peripherally

supported by a Si box shaped die and is covered by a thick Si lid parallel to the membrane and

open on two ends (see Figure 5.3b). The piezoresistive unit is an ion implanted Wheatstone

bridge in a 50 micron thick Si membrane peripherally supported by a Si box shaped die which

has been anodically bonded to a Pyrex substrate.

The dual sensor assembly is encased in a corrosion resistant 316 stainless steel tube shell. The

durable tube design withstands high pressure (150 psig/10.2 bar) and high pressure surges. Since

the Pirani sensor is miniaturized and employs a Pt thin film on a Si

membrane (instead of a

conventional long fragile wire), the transducer can withstand high levels of mechanical shock.

The Model 2002 is designed for fast response. The micromachined sensing elements have a very

small mass and operate in a constant temperature (Pirani) and a constant current (piezo) feed-

back mode. This makes response time very fast as compared to other commercially available

sensors which have to change the temperature of a significant mass to reflect pressure changes

and have a large internal volume which must equalize in pressure with the system before the

sensor can reach its final value. The transducer’s small internal volume (<1.5cc) permits rapid

pneumatic response to system pressure changes. Further, the small geometry of the transducer

prevents thermal convection currents which allows the sensor to be mounted in any orientation

without calibration shifts.

1 2 3 4 5 6 7 8 9 10 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Teledyne Vacuum Gauge 2002 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Teledyne Vacuum Gauge 2002