Teledyne 465L Manuel d'utilisateur télécharger pdf (Page 24)

Teledyne API Model 465L O

Monitor Operation Manual

22 05509F DCN6409

Figure 4-1: NEMA AC Power Connection to Monitor

6. Connect the power cord to an appropriate power outlet (see the serial number tag for

correct voltage and frequency).

CAUTION

Verify that the instrument is set up for proper line voltage and

frequency. Observe local electrical codes when connecting power to the

monitor.

7. Turn on the M465L by switching the switch on the left side of the rear panel, or applying

power to the monitor (NEMA configuration.) The front panel display should light with a

sequence of messages, including the instrument serial number and software revision.

(When the instrument first powers up, the display will show ‘xxxx’, indicating that the

instrument is in start-up mode, waiting for the UV detector readings to stabilize)..

8. After the start-up period, the instrument will begin displaying the ozone concentration

and the optional stream selector will begin operating, if installed.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 91 92

Pas de commentaire

Teledyne 465L Manuel d'utilisateur Page 24